Rode Stereo VideoMic Camera-Mounted Stereo Microphone

$197.00

Integrated Shock Mount
Camera Mountable

SKU: 11442 Categories: , , Tags: , ,

Description

The Rode Stereo VideoMic delivers true stereo X/Y recording in a compact, camera mountable microphone. The Stereo VideoMic accurately captures stereo ambiance while exhibiting excellent off-axis rejection and signal-to-noise ratio. The small, light weight profile allows quick and unobtrusive mounting on DV and HDV cameras without appearing in the frame. The shock-mount is attached to the microphone and a versatile shoe mount allows the entire microphone to be mounted to a hot-shoe on a camcorder, boom pole or stand. Replaceable rubber O-rings suspend the microphone on the shock-mount and protect against noise due to movement and handling. A coiled cable terminates to a stereo TRS 1/8? (3.5mm) mini output connection. The Rode Stereo VideoMic is powered with a standard 9 Volt battery. The Stereo VideoMic is an excellent choice for weddings, Electronic News Gathering (ENG), interviews and more.

Stereo X/Y Recording
The Rode Stereo VideoMic features true X/Y stereo pick up for accurate ambiance reproduction. Excellent off-axis rejection minimizes residual noise.
-10dB Pad
The Stereo VideoMic features a -10dB Pad switch for enhanced headroom and minimal distortion.
Camera and Boom Pole Mountable
The versatile shoe mount allows the microphone to be mounted to camcorders, stands or boom poles.
Integrated Shock-Mount
The Stereo VideoMic features a permanently attached shock mount with a camera mounting shoe underneath. The shock mount features replaceable rubber o-rings that protect against noise caused by abrupt movement and shock.
High Pass Filter Switch
A high-pass filter switch eliminates room ambiance and noise below 80Hz. This results in improved intelligibility while recording around machinery, wind or close proximity.
Internal Power
The condenser element is powered with a standard 9-volt battery.

Package Weight
1.1 lbs

Package Dimensions
10.9 x 5.2 x 3.0 in

Box Dimensions (LxWxH)
10.9 x 5.2 x 3.0?

Signal-to-Noise Ratio
79dB (A-weighted per IEC651)

Output Impedance
200 ohms

Power Requirements
9 Volt DC Alkaline

Maximum Input Sound Level
130dB (@ 1kHz. 1% THD into 1 ohm load)

Weight
11.64 oz (330g)

Output Connectors
Stereo mini jack ? 1/8? (3.5mm) Right Channel ? Ring

Transducer
Condenser

Low Frequency Roll-Off
80Hz / 12dB octave

Package Weight
1.1 lb

Dimensions
6.85 x 3.93 x 2.51? (172 x 100 x 64mm) (Length x Height x Diameter)

Pad
-10dB

Dynamic Range (Typical)
115dB (per IEC651)

Polar Pattern
Supercardioid

Frequency Response
40Hz ? 20kHz Selectable HPF @ 80Hz / 12dB /octave

Reviews

There are no reviews yet.

Be the first to review “Rode Stereo VideoMic Camera-Mounted Stereo Microphone”

Your email address will not be published. Required fields are marked *