Rode VideoMic with Rycote Lyre Suspension System

$119.00

Directional Video Condenser Microphone
Rycote Suspension System
Mounts to Standard Camera Shoe
3.5mm Mini Plug
Studio-Quality Sound
9V Battery Powered

SKU: 13033 Categories: , , Tags: , ,

Description

The VideoMic with Rycote Lyre Suspension System from Rode is a shotgun microphone that can easily be mounted on a DSLR camera. It features a Rycote suspension system that attaches to the camera?s shoe. The VideoMic is lightweight, and when mounting on a camera it does not appear in the frame. The VideoMic can also mount to Rode?s boompoles for elevated audio capture. Its super-cardioid polar pattern attenuates sounds from the sides. The result is a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances.
The included Rycote Lyre is a non-elasticated suspension structure composed of a hard-wearing thermoplastic. It is more effective at acoustically decoupling microphones from unwanted vibrations, handling and cable-borne noise than elasticated suspensions. The lyre remains effective at a wide range of temperatures and is virtually indestructible. It will never wear out, sag, snap or require any rethreading to maintain its effectiveness.
An attached, coiled cable terminates to a 1/8? (3.5mm) mini output connection. The VideoMic features a condenser element that utilizes a standard 9 Volt battery (sold separately). The microphone will run for approximately 100 hours on a single battery.

Barrel Canceling Pick Up
The Rode Video Mic functions as a true line plus gradient microphone with a super-cardioid pattern in the front and a barrel that cancels side-audio. The result is maximum pick up of the source in highly ambient and noisy environments.
Selectable 10 or 20dB Pad
When capturing audio in loud environments, the VideoMic offers built-in attenuation. The selectable 10 or 20dB pad lessens the microphone?s sensitivity, allowing it to handle higher SPL levels without sacrificing clarity.
High Pass Filter Switch
A high-pass filter switch eliminates room ambiance and noise below 80Hz. This results in improved intelligibility while recording around machinery, wind or close proximities.
Internal Power
The condenser element is powered with a standard 9-volt battery for up to 100 hours (approximately).

Package Weight
0.85 lbs

Package Dimensions
11.7 x 5.3 x 3.4 in

Transducer
Condenser

Output Connectors
1/8? (3.5 mm) stereo mini plug, male

Weight
6.21 oz (176 g)

Dimensions (? x H x L)
2.55 x 4.02 x 8.84? (65 x 102 x 250 mm)

Maximum Input Sound Level
134 dB (@ 1% THD into 1k?)

Output Impedance
200?

Power Requirements
9V battery

Box Dimensions (LxWxH)
11.7 x 5.3 x 3.4?

Signal-to-Noise Ratio
74 dB (1 kHz @ 1 Pa; per IEC651, IEC268-15)

Polar Pattern
Super-cardioid

Frequency Response
40 Hz to 20 kHz

High-Pass Filter
@ 80 Hz, 12 dB/octave, selectable

Dynamic Range (Typical)
114 dB (per IEC651, IEC268-15)

Pad
-10 and -20 dB

Package Weight
0.85 lb

Reviews

There are no reviews yet.

Be the first to review “Rode VideoMic with Rycote Lyre Suspension System”

Your email address will not be published. Required fields are marked *